Controls for PELLPAL D 16, 20, 25 kW boilers
Proper combustion process with appropriate parameters is possible with appropriate chimney draft. If the draft in the chimney is too low, combustion in boilers, including PellPal D boilers, may be ineffective.
To increase the chimney draft, an exhaust fan should be used mounted on the chimney (flue) of the boiler, whose operation is controlled by an appropriate regulator, in this case the PellPal D controller offered by us. For wood-fired PellPal D boilers where the combustion process takes place on a cast iron grate, you can use a specially prepared for them set.
The construction of PellPal D boilers has been designed in such a way that a place where an exhaust fan can be installed in the exhaust element of the chimney has been designed. The solution developed in this way means that there is no need to make modifications to the existing chimney in a given building.
- Add feedback:
- Code: 15993
- Manufacturer: DOMER
- Manufacturer's code: 5902429316388
- Weight: 4.5 kg
-
Availability:
AVAILABLE NOW
- Net Price: €145.89 €179.44
- pcs.
-
Payment in cash, Payment via bank transfer, Online Payments Payment Cards, ApplePay, Google Pay - P24, PayPro SA, Payment by bank transfer - wait for the proforma invoice to be sent
-
Buy now, pay in 30 days.
-
Fast Blik payments.
The product is shipped within 24 hours.
We complete the order within 24 hours.
You can return the product within 14 days.
Set of exhaust fan and fan controller
Proper combustion process with appropriate parameters is possible with appropriate chimney draft. If the draft in the chimney is too low, combustion in boilers, including PellPal D boilers, may be ineffective.
To increase the chimney draft, an exhaust fan should be used mounted on the chimney (flue) of the boiler, whose operation is controlled by an appropriate regulator, in this case the PellPal D controller offered by us. For wood-fired PellPal D boilers where the combustion process takes place on a cast iron grate, you can use a specially prepared for them set.
The construction of PellPal D boilers has been designed in such a way that a place where an exhaust fan can be installed in the exhaust element of the chimney has been designed. The solution developed in this way means that there is no need to make modifications to the existing chimney in a given building.
Controller for PellPal D boilers
The PELLPAL D microprocessor temperature controller is designed to control the operation of the central heating boiler. equipped with a blower or an exhaust fan, stabilizes its temperature by means of smooth regulation of the fan speed, blows the boiler (in order to remove excess gases generated in the combustion process) and secure the central heating system. before boiling water. PELLPAL D controls the operation of the central heating pump and the heat buffer loading pump.
Exhaust fan
Purpose: the fan is designed to transport hot air. It can also be used for general ventilation of rooms and technological equipment.
Construction: the fan consists of a hot-dip galvanized steel casing to which an external motor is attached. This motor is located outside the active part of the fan. The suction opening can be protected with a mesh or adapted to a stub pipe mounted to devices (e.g. to gas radiators, spiro pipes). The outlet opening is finished with a round flange adapted to connect the exhaust pipe.
Control: the fan is equipped with a Hall sensor (Hall Sensor IC) as standard, which, when connected to the appropriate controller, allows you to precisely regulate the fan's rotational speed.
Technical parameters:
power supply: 230V ~ 50Hz
ambient temperature: 0-50OC
input power: max 30W
gas exhaust temperature: max 250 OC
number of speeds: 1
type of work: continuous
rotational speed: 2480/min
power cord: 2m